Select the type of Backup: Settings Only (Configuration) or Settings and Data (Configuration and Data).Ĭaution: Backing up data can create a large file (several GB).If the USB storage device is not recognized and does not appear on the list, unplug it and try another port. Click to highlight the USB storage device from the backup device list.Click the Enable / Disable Database Backup to check the option box.Click Settings and then Backup and Restore.
Log on using the CopperCube username and password.Access the CopperCube graphical user Interface by entering the CopperCube IP address in the address bar of the web browser.If you are using a laptop, connect your laptop to the diagnostic port (LAN 2) of the CopperCube.Make sure this is the only USB device on the CopperCube. Plug the storage device into a USB port of the CopperCube.Software: A web browser to access the CopperCube graphical user interfaceįollow the procedure below to back up your CopperCube:.Laptop or operator workstation specifications: Using a slow device only makes this process a lot more painful. Minimum write speed of 50MB/sec The backup will be very large and the time taken can be significant.The following are the minimum requirements for USB storage: Laptop, or operator workstation connected to the same network as the CopperCube and web browser installed.Įxternal USB storage technical specifications:.In addition, a spare USB storage device is recommended.
#Coppercube vr phone full
The CopperCube backup feature allows the user to create a full or partial backup file of the CopperCube.
0 kommentar(er)
